cxol at 3.0v crystal clock oscillator specification issue 1; april 2016 outline (mm) sm1 = gold plated (rohs) description the cxol at 32.768khz surface-mount oscillator achieves the low power comparable with a tuning fork design and the fast start- up and tight frequency stability attained by an at cut crystal design. designed for applications requiring ultra-low current (15a), fast start-up time (15ms) and a tight frequency stability (30 ppm to 100 ppm) over a wide temperature range (-55c to +125c). these oscillators are also capable of withstanding significantly higher shock than a standard tuning fork design. sm1 gold plated (rohs) sm4 solder plated (rohs) sm5 solder dipped (rohs) fe atures : ultra low current (typical 15a) fast start-up (typical 15ms) tight tolerance high shock resistance low ageing cmos output optional output enable/ disable with tri -state hermetically sealed ceramic package full military testing available applic ations : military, aerospace & avionics - communications navigation gps industrial, computer & communications - handheld instrumentation transponder /animal migration please note that all data is only valid at 25c unless otherwise stated. frequency parameters frequency 32.768khz 25.00ppm frequency tolerance @ 25c tolerance condition frequency stability 10.00ppm to 100.00ppm 5ppm max in 1st year @ 25c ageing frequency stability does not include frequency tolerance @ 25c all parameters are measured at 25c with a 10m? and 15pf load at 3.3v note: other frequency tolerances and stabilities are available - please contact an iqd sales o ffice electrical parameters 3.0v 10% supply voltage supply current: 15 a typ supply voltage (absolute maximum rating): -0.5v to 5.0v operating temperature ranges -10 to 70c -40 to 85c -55 to 125c printed on 28 apr 16 12:24 using model data sheet v1.2550 page 1 of 3 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
cxol at 3.0v crystal clock oscillator specification output details output compatability cmos drive capability 15pf output level high voh : 90%vs min output level low vol : 10%vs max rise time (10%-90%): 2.8ns typ, 10ns max fall time (90%-10%): 2.4ns typ, 10ns max output control start-up time: 15ms typ environmental parameters shock: 5000g, 0.3ms, 1/2 sine vibration : mil-std-202g, method 204d, condition d: 20g, 10hz-2000hz swept sine note: random vibration test is also available - please contact an iqd sales o ffice storage temperature range: C55 to 125c manufacturing details maximum process temperature: 260c for 20sec max ordering information frequency* model* termination variant * output frequency tolerance (@ 25c)* frequency stability (over operating temperature range)* operating temperature range * pad 3 function* (minimum required*) termination variants : sm1 = gold plated sm4 = solder plated sm5 = solder dipped (note: non-rohs compliant terminations also available - please contact an iqd sales o ffice ) pad 3 function options: en = enable/disable nc = no connection example 32.768 khz cxol at 3.0v sm1 cmos 25ppm 100ppm C40 to 85c nc compliance optional rohs status ( 20 11 /65/eu) compliant reach status ms l rating (jdec-std-033): not applicable packaging details tape & reel in accordance with eia-481-d pack style: reel pack size: 1,000 supplied on a tray pack style: tray pack size: 1 printed on 28 apr 16 12:24 using model data sheet v1.2550 page 2 of 3 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
cxol at 3.0v crystal clock oscillator specification electrical specification - maximum limiting values 3.00v 10% frequency min temperature range stability (min) current draw rise and fall time duty cycle c ppm ma ns % -55 to 125 32.768000khz 50.00 - - 45/55% -40 to 85 20.00 - - 45/55% -10 to 70 10.00 - - 45/55% this document was correct at the time of printing; please contact your local sales office for the latest version. click to view latest version on our website. printed on 28 apr 16 12:24 using model data sheet v1.2550 page 3 of 3 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
|
